UV Eco
Thanks to its technical specifications and its modular design, the UV ECO dryer is a competitively priced and flexible solution to the curing of UV inks.
Available in one or two lamp configuration.
The UV module can be connected in-line to hot air drying lines
Main features
Structure
Modular structure made of electro-welded steel profiles, with built-in electrical cabinet.
Lamp housing hood
The hood housing the lamp and the quartz filter can be lifted by means of cylinders. Both the lamp and the quartz filter can be pulled out on the operator side for ordinary cleaning and maintenance purposes.
Ventilation
The efficient ventilation system keeps the temperature of the lamp and of the quartz filters under control, provides for heat and ozone extraction and grants excellent substrate dimensional stability. The exhaust system, routed through the conveyor belt as well, avoids fluttering of even the lightest substrates.
Conveyor belt
PTFE coated fibre-glass mesh with stepless adjustable speed from 4 to 40 mt/min. The working speed is set from the control panel.
A pneumatic belt tracking system ensures excellent belt alignment at any speed.
Adjustments and controls
All the control devices are placed in the built-in a control cabinet.
The control panel also allows :
1. to switch on the lamp and select its output power (120 W/cm - 80% or 100%)
2. to check and adjust the belt speed
3. to check the lamp working hours
4. to check the switch-off cycle of the lamp
5. display of the alarms
Safety features
The UV ECO dryer is manufactured strictly in compliance with CE safety regulations. It is equipped with :
- emergency pushbuttons on both sides of the structure
- protections on both sides of the hood to prevent leakage of UV rays
- automatic lamp switch off device in case
- the conveyor belt stops
- the hood inadvertently goes up
- the ventilation system fails
- the temperature on the lamp reflector increases
clicca sull'immagine per accedere alla pagina dell'usato